1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 noise suppression products/emi suppression filters > emifil r (capacitor type) > single circuit type for signal lines 2013.11.11 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. emifil r (capacitor type) single circuit type for signal lines nfm3dc series (1205 size) c dimensions 1.10.3 3.20.2 0.30.2 1.250.2 0.70.2 0.250.2 (1) (2) (2) (3) (in mm) : electrode c insertion loss characteristics (main items) 0 20 40 60 80 100 1 10 100 1000 0.1 2000 frequency (mhz) (50 - 50 ) nfm3dcc470u1h3 nfm3dcc220u1h3 NFM3DCC101U1H3 nfm3dcc221r1h3 nfm3dcc471r1h3 nfm3dcc102r1h3 nfm3dcc222r1h3 nfm3dcc223r1h3 insertion loss (db) c equivalent circuit input (output) (1) output (input) (3) (2) gnd no polarity. c packaging code packaging minimum quantity l 180mm embossed tape 4000 b bulk(bag) 500 c rated value ( p : packaging code) part number capacitance rated current rated voltage insulation resistance (min.) operating temperature range nfm3dcc220u1h3 p 22pf 50/-20% 300ma 50vdc 1000m ohm -55 to +125c nfm3dcc470u1h3 p 47pf 50/-20% 300ma 50vdc 1000m ohm -55 to +125c NFM3DCC101U1H3 p 100pf 50/-20% 300ma 50vdc 1000m ohm -55 to +125c nfm3dcc221r1h3 p 220pf 50/-20% 300ma 50vdc 1000m ohm -55 to +125c nfm3dcc471r1h3 p 470pf 50/-20% 300ma 50vdc 1000m ohm -55 to +125c nfm3dcc102r1h3 p 1000pf 50/-20% 300ma 50vdc 1000m ohm -55 to +125c nfm3dcc222r1h3 p 2200pf 50/-20% 300ma 50vdc 1000m ohm -55 to +125c nfm3dcc223r1h3 p 22000pf 50/-20% 300ma 50vdc 1000m ohm -55 to +125c number of circuit: 1 continued on the following page.
2 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 2 noise suppression products/emi suppression filters > emifil r (capacitor type) > single circuit type for signal lines 2013.11.11 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. continued from the preceding page. c ! caution/notice ! caution (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro? le where peak solder temperature is below the tin melting point is used. please con? rm the solderability of tin plating termination chip before use.
|
